The fuel filter is located on bulk head, to left hand side of the engine. (see pic above) 1: Start by cleaning the area around the filter head. 2: Place a container beneath the fuel filter to catch any spillage. 3: Loosen the bleed screw (shown in the photo) using a 10mm spanner.

Locate your battery under the hood and find the negative terminal. It will usually be marked by a black cap and/or a negative symbol. Use a wrench to loosen the negative terminal connector. You should be able to pull the cable off easily. Carefully hold it to the side for 30 to 60 seconds.

56. Mar 30, 2015. #12. go and get a can of leak detector spray and a can of brake cleaner. Clean the housing with the brake cleaner and then spray the leak detector on the housing when the engine is running, should be able to see where its coming from, maybe cracked filter housing? F. Don't know if it should be there or not. It at the bottom of a little valley/recess about 3/4mm deep. oilleak1.JPG. This is a photo looking down on mine with the filter removed. The arrow shows the little hole. oilleak2.JPG. This shows the oil under ultra voilet light after it has been idling for a few minutes. The satellite fuse box (Armoured) The six-way satellite ATO fuse box is mounted in the base of the centre console cubby box. To access the fuses, remove the CD holder and cubby box floor. The fuse box has a removable transparent cover. Fuse box diagram (fuse layout), location, and assignment of fuses Land Rover Discovery 3 / LR3 (2004, 2005 Where is the crank sensor located in a 2001 land rover discovery. a fuel filter is on a landrover discovery tdv6. big 4x4s like the discovery 3 tdv6. . 46 177 8 243 371 93 104 27 337

land rover discovery 3 tdv6 fuel filter location